10 CFM Deliquescent Air Dryer, Van Air Systems D4

Description

10 CFM Deliquescent Air Dryer, Van Air Systems D4
10 CFM Deliquescent Air Dryer, Van Air Systems D4
The D4 is a simple deliquescent compressed air dryer for 10 CFM.  The dryer is frequently paired with a 2.5 horsepower air compressor.  The D4 is constructed of welded carbon steel and has an ASME Code pressure vessel certification.  The D4 has no moving parts or power requirement and is often used as a point-of-use dryer to protect a paint booth, blast cabinet, or pneumatic tool from the harmful effects of wet compressed air.
How the D4 works.
The D4 consists of an epoxy lined ASME Code certified tank filled with Dry-O-Lite desiccant tablets.  These tablets act as sponges for humidity, soaking up water vapor.  Wet compressed air enters the bottom of the D4 and flows up through the Dry-O-Lite.  The tablets gradually dissolve into a liquid.  The liquid collects at the bottom of the tank to be drained.  Dry compressed air exits the top of the dryer.  No moving parts.  No power requirement.
An
F200-25-1/2-B-MD-PD6
or equivalent filter should be installed immediately after the dryer to remove oil mist and particulates.
Installation.
Simply attach the dryer a wall and connect air lines.  Fill the tank with Dry-O-Lite and connect a drain line.
Maintenance.
Drain liquid after each 8 hours of operation.  A manual ball valve is included.   Pro tip: use flexible tubing to collect the liquid in a container.  Consider installing a
MDV-400 automatic drain with a 1/2" valve
.  Every 2-3 months inspect the Dry-O-Lite level by looking thru the sight glass on the side of the tank. Top off the tank with new Dry-O-Lite tablets as necessary. Dry-O-Lite is non-toxic and non-hazardous.
Specifications & Features
Rated Flow Capacity: 10 CFM @ 100 PSIG; 12.2 CFM @ 125 PISG; 14.4 CFM @ 125 PSIG.
250 PSI Maximum Working Pressure
Mounting Bracket Included
ASME Code Certified Carbon Steel Vessel, with Enamel Exterior Coating and Internal Epoxy Lining
3/4" NPT(f) Air Inlet and Outlet Connections
1/2" Ball Valve Included
Site Glass for Desiccant Level Monitoring
Dimensions: 32" (h) x 4" (diameter), 30 lbs. empty
Includes 18 lbs. of Dry-O-Lite Desiccant Shipped Loose.  The D4 holds 7 lbs. of Desiccant When Completely Full.
Up to 20⁰ F Dew Point Suppression
Recommended Accessories
Auto Drain MDV-400I 1/2"
- Save 8 on the auto drain when purchased with the D4 dryer.
After-Filter F200-25-1/2-B-MD-PD6
- Save .75 on the filter when purchased with the D4 dryer.
Technical Documents
Drawing
Instruction Manual
** PLEASE READ
DELIVERY
SECTION BELOW REGARDING AVAILABILITY **
ITEMS DESCRIBED AS "OEM EQUIVALENT" ARE AFTERMARKET REPLACEMENTS
CONTACT SELLER WITH QUESTIONS
ABOUT US
At Moisture Boss, LLC our specialty is clean dry compressed air. We offer a huge range of products for the removal of oil, particulates and water from industrial compressed air systems. Our product range includes compressed air dryers, filters, desiccants, condensate drains, oil-water separators and thousands of OEM Equivalent filter elements. With more than two decades of industry experience, we look forward to putting our knowledge to work for you.
DELIVERY
Most of our listings drop ship in 1-2 business days directly from the manufacturer or 3rd party warehouses; this is how we keep prices and costs low. Available quantities shown on eBay are a good faith representation of current stock
but are not synchronized in real time with warehouse inventory
. If an item is back ordered after order placement, we will contact you immediately.
For time critical requirements, please contact us for a delivery commitment.
We are also glad to offer expedited shipping options and international shipping.
WARRANTY
Capital equipment carries the warranty of the manufacturer, typically 12 months or longer. Contact us for details on a given item.
OEM Equivalent filtration products (coalescing elements, air-oil separators, oil filters, and inlet filters) and guaranteed to fit the housing of the original equipment manufacturer.  OEM Equivalent filters may be returned pre-paid within 30 days of shipment; a 20% re-stock fee may apply.  Returned filters must be in un-used and re-salable condition.  Return authorization requests are required. Mist eliminators and manufactured-to-order filter elements may not be returned.
RETURNS
Most capital equipment may be returned in new and un-used condition within 30 days of the purchase. The buyer will be responsible for pre-paid return freight and may be charged a 20% re-stocking fee. A return authorization number is required. Manufactured-to-order equipment may not be returned.
Return requests for desiccant will be managed at our discretion.
DEFINITION
Products marked "OEM Equivalent" are aftermarket replacement products.  We have no affiliation with the original manufacturers whose part numbers are used for reference within listings described as "OEM Equivalent."